HEBEIOUTAI ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD.

Electric Plug Valve

Electric Plug Valve
Similar Products
  • High Temperature Unloader

    High-temperature type star unloader according to the different temperature of the material delivery and feeding port because of the impact of temperature on the expansion of the body, and the bearing ...

  • PPS Filter Felt Bag

    PPS Filter Felt Bag description:Material: Polyphenylene sulfide (PPS)Common industries and conditions: for coal-fired boilers, waste incineration, metal smelting, chemical industry and other low-flue ...

  • Electromagnetic Valve For Water

    Brief introduction of Electromagnetic Valve For WaterThere are closed chambers in the solenoid valves for water use. There are through holes in different positions. Each hole leads to different oil pi...

The opening and closing part of the electric plug valve is a gate plate. The direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters.

Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter.

Leave us Message
  • TEL:+86 13932733791
  • FAX:0317-8288592
  • EMAIL: info@senotay.com
  • ADDRESS:Botou Industrial Zone, Cangzhou City, Hebei Province