The bucket elevator produced by our company consists of a moving part (hopper and traction belt), an upper section with a drive roller, a lower section with a tensioning drum, an intermediate casing, a driving device, and a check brake. It is suitable for the powdery or granular small block-like non-abrasive or semi-abrasive bulk materials, such as coal, sand, coke, cement, water ore, etc.
Commonly used continuous bucket elevators are available in belt, chain and plate chain. When the bucket elevator
is running, dust will be emitted from the lower or upper part. The hoist has different lifting heights and different take-over methods. When raising hot materials, no matter how high the lift is, you need to set the suction point at the upper and lower points.