Ash Discharge Valve
The opening and closing part of the electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters.
Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter.
Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control.
Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation.
Electric Ventilation Butterfly Valve is mainly used in the dusty cold wind or hot air gas pipelines of ventilation, environmental protection projects in metallurgy, chemical industry, building materials, power stations, glass and other industries, as a gas medium to regulate the flow or cutting device.
Pneumatic plug-in valve is a main control equipment for the flow or delivery of powder, crystal grain, granular materials and small pieces of material. It is widely used in metallurgy, mining, building materials, food, chemical and other industries to control flow changes or cut off quickly. Pneumatic flapper valve has the advantages of simple structure, flexible operation, light weight, no jamming, and is especially suitable for the transportation and flow regulation of all kinds of solid materials and about 50mm block and lump materials. The installation is not limited by the angle and is easy to operate. Can adjust the scale at any time. Structural features: Simple structure, flexible operation, light weight, no jamming, fast cutting, especially suitable for all kinds of non-viscosity solids, powders, and granules less than Φ10mm, transportation of crystal grain and flow regulation, installation is not limited by the angle , Easy to operate, can adjust the opening degree at any time. Mainly used for building materials, metallurgy, mining, electricity, chemicals, glass, light industry, food and other industries, the top, bottom and import and export. It is the reason that the control flow changes greatly, starts frequently, and cuts off rapidly.