HEBEIOUTAI ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD.

FU Chain Conveyor

FU Chain Conveyor
Similar Products
  • Woodworking Dust Remover

    Most of the dust collectors in woodwork factories use centralized treatment system, which can save investment and facilitate management. The woodworking machinery in the furniture factory will produce...

  • Venturi Tube

    Venturi tube is short for Venturi tube. The principle of Venturi effect is that when the wind blows over the barrier, the air pressure near the port above the leeward surface of the barrier is relativ...

  • Spring Skeleton

    The spring frame (spring bag cage) is an essential accessory for the external filter dust collector. It is divided into two types: venturi tube and non-venturi tube. It has a certain flexibility becau...

FU Chain Conveyor (abbreviated as "Chariot") is a new product for horizontal (or inclined 15) conveying of powdery, small-grained materials, long life, high operating reliability, energy-efficient, sealed and safe. And easy maintenance. Its use performance is obviously superior to screw conveyors, buried scraper conveyors, and other conveying equipment. It is an ideal new type of equipment. Has been widely used in building materials, construction, chemicals, thermal power, food processing, mining, machinery, smelting, transportation, ports, and transportation industries.

Working principles of FU Chain Conveyor:

FU Chain Conveyor, its advantage derives from its working principle. Because the material has internal friction and lateral pressure, the movement of the conveyor chain increases the internal pressure of the material in the machine tank and the internal friction between the particles. When the internal friction between the material layers is greater than the external friction between the material and the groove wall, the material flows forward along with the transport chain like water. When the ratio of the material layer height to the machine groove width meets certain conditions, Form a stable material flow. The advanced conveying principle, excellent design, and manufacturing process provide a reliable guarantee for the excellent performance of this series of products.

Main features of FU Chain Conveyor:

  • A large amount of conveying, the high-efficiency conveying mechanism allows large quantities of materials to be conveyed in a small capacity space, with a conveying capacity of 15 to 600 m3/h.
  • The transmission of energy consumption is low, with the internal friction of the material, change the material to pull the animal feed, compared with the screw conveyor to save 40% to 60%.
  • Sealing and safety, fully sealed chassis to make dust can be drilled seamlessly, environmental health, safe operation, reliable operation.
  • Long service life, the use of alloy material processed by advanced heat treatment of the conveyor chain, the normal life of> 5 years, the life of the roller chain (according to different materials) can use 1 to 3 years.
  • The process layout is flexible, can be elevated, ground or pit layout, can be level or climbing (not more than 15 degrees) installation, can also be installed on the same level plus climbing, can also be more points into the material.
  • Long transport length, horizontal transport distance up to 60 meters.
  • The use of low-cost, energy-saving and durable, less maintenance.
  • The use of low-cost, energy-saving and durable, very low maintenance rate, reduce consumption, improve efficiency.

Selection and process layout

The specifications of the FU chain conveyor are listed in the table below. The table lists the range of conveying capacity of each model at different chain speeds. The same conveying capacity can be selected in the table for different models. If a larger model is used, the chain speed is lower and the wear is small, but the equipment investment is higher. If a smaller model is selected, the chain speed is faster and the wear is relatively high. High, but the equipment investment is less provincial.

It should be pointed out that when the actual delivery volume does not reach 65% of the machine's delivery capacity, the conveyor chain is idle due to the thin material layer in the machine tank, which also increases equipment wear. Therefore, it is recommended that the actual delivery volume of the conveyor should not be lower than the minimum value of the delivery capacity in Table 1. After the actual delivery volume is multiplied by 1.2, it should not be higher than the maximum value of the delivery capacity in the table.
Leave us Message
  • TEL:+86 13932733791
  • FAX:0317-8288592
  • EMAIL: info@senotay.com
  • ADDRESS:Botou Industrial Zone, Cangzhou City, Hebei Province