HEBEIOUTAI ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD.

Precautions For Use of Dust Collector Filter Bags

Nowadays many factories will produce a lot of dust during the working process. These dust will bring some environmental problems and potential safety hazards to the working environment and the external environment. Therefore many factories are equipped with dedusting equipment that using dust collector filter bags. This kind of dust collector filter bags has a good dedusting effect and convenient operation of deashing. But there are still many problems to be noticed in the use process. Next, let me introduce to you the matters needing attention in the use of dust collector filter bags of SENOTAY.


First, the new and used dust collector filter bags need to be placed separately.
Because there is a general range for the service life and dust removal time of dust collector filter bags. If the new and used dust collector filter bags are mixed together, it will bring some problems for the subsequent periodic cleaning.

Second, the aging problem of dust collector filter bags.
There are several situations that will lead to aging of dust collector filter bags. The first is that the temperature of the gas is too high. If the temperature of filtering gas is too high, the filter material of dust collector filter bags will be hardened and then shrinking. The second is that the filter gas contains certain acidic or alkaline substances. Once these substances contact the fabric, it may also cause dust collector filter bags aging.

Third, after dust collector filter bags are replaced, you should be careful to the dedusting process.
After the bag is taken off, we need to use compressed air to carry out the blow treatment of dust collector filter bags. After that, we should carefully check whether there is a hole in the bag. If any, it will need replacement or repair. If stubborn dust cannot be blown down on the cloth bag, it can also be cleaned with clean water.

In short, be careful, the new and used dust collector filter bags should be placed separately in the using process. When using dust collector filter bags, we should pay attention to the gas temperature and do not let the temperature be too high. And acid or alkaline material cannot be used to the bags.

Related News
  • How To Maintain And Repair The Baghouse Filter Bags?

    How To Maintain And Repair The Baghouse Filter Bags?

    August 7, 2018Now a lot of manufacturers widely use the dust-proof device, because its demand is relatively large, so many manufacturers have always attached great importance to it; especially in steel plants, refi...view
  • How Can Reduce The Probability Of Aging Of Dust Bag

    How Can Reduce The Probability Of Aging Of Dust Bag

    May 24, 2018One: Temporarily strengthen cleaning.This will prevent clogging of the dust bag and reduce the resistance of the dust bag.Two: The correct choice of dust bag.Choose a dust bag that is suitable for wor...view
  • Standards of Pulse Jet Type Bag Filter

    Standards of Pulse Jet Type Bag Filter

    August 7, 2018Pulse jet type bag filter is a kind of filter type dust collector of high-efficiency which uses high-medium-pressure pulse air to clean dust automatically and has no moving parts inside. Its character...view
  • High Quality Dust Bag Is The Manufacturer'S Gold Signboard

    High Quality Dust Bag Is The Manufacturer'S Gold Signboard

    May 24, 2018Under the socialist market economic system, the quality of dust bag manufacturers is fundamental to the survival and development of manufacturers of dust bag manufacturers. Dust bag manufacturer manuf...view
Related Products
  • TEL:+86 13932733791
  • FAX:0317-8288592
  • EMAIL: info@senotay.com
  • ADDRESS:Botou Industrial Zone, Cangzhou City, Hebei Province